WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
However, it also includes a powerful external antenna for those installations that require it. The external antenna can be pole mounted on standard 1" threaded tubing or mounted on a flat surface with the included base. The cable has a small connector, about the same diameter as the cable, to facilitate easy routing through small holes.
The fast 5Hz GPS update rate results in higher resolution and smoother tracks on your plotter or MFD, even during high-speed maneuvers. It can be used as a source of GPS data for the entire NMEA 2000 network
Easy to Install:
Mounting -
Mounting the XB-6000 is made easy with innovative cable connection points that create low-profile installations. As well as being waterproof the XB-6000 also has multiple connection options: NMEA 2000 / 0183 and USB connectivity.
Fully Water Proof - Unlike most other AIS transponders, the XB-6000 is waterproof so you can mount it wherever convenient without worrying about water. It is even rated IPx7 which means it is totally submersible to 1m for up to 30 mins!
Self Diagnosis Status Lights - Multi-color LEDs keep you informed of the operational status of the XB-6000 with self-diagnosis that shows warnings if AIS, GPS, or antenna are not functioning.
USB Connection (waterproof and locking with optional cable) - The USB connection can be used to connect the XB-6000 to on-board computers. The XB-6000 provides a GPS and AIS data feed directly to computer-based navigation software. It translates selected NMEA 2000 instrument data and sends that to your computer too. An optional 5m (16') waterproof cable features a locking ring so it can't vibrate out of the back of the XB-6000.
Other Innovative Features:
Ultra-low power consumption
Designed for minimal power consumption the WatchMate XB-6000 is extremely well suited for energy-conscious vessels.
Low power operation is particularly important on a long voyage when charging from solar or wind. The XB-6000 consumes less power than other AIS transponders even with the NMEA 2000 gateway operating!
Positive Identification - You'll have each vessel's name and call sign and others using AIS will also have yours. If you wish to call another vessel you will be able to ensure you are talking to the correct vessel. This is very important when operating in busy areas or in bad weather when visibility is reduced.
Silent Mode Control via PC, Mac, or an external switch - The XB-6000 can be put into silent mode. When in this mode, the AIS receivers and GPS continue to operate normally. The only change is transmissions are inhibited. Perfect for those times when you want privacy. Silent mode can be controlled by an external switch (not included) or via your PC or Mac.
Firmware Updates - When you buy a WatchMate XB-6000, you get an extendable AIS platform. Designed to be compatible with a continuous stream of feature updates, your WatchMate XB-6000 can be upgraded with the latest firmware via USB and your computer.
